124 Teflon hose
-
Appearance Outside stainless steel braid
-
Hose Construction Extruded tetrafluoroethylene tube reinforced with
wire braid of braids of corrosion-resistant steel wire. Inner layer of
conductive carbon black to dissipate static electricity.
-
Recommended Usage For use in high temperature fuel, lubricating
oil, water, alcohol, chemical, and hydraulic and pneumatic systems.
-
Recommended temperature limits -65 to +450 degrees F.
-
Hose assembly
-
Equivalency Aeroquip equivalent is 666 -3 thru -12 and 667 for -16
thru -32 Mil-Spec MIL-H-25579C, Amend. 1 and MIL-H-27267A, Amend 3.
124 Hose Specifications
| Hose Size |
Nominal I.D. |
Max operating press, psi |
Min. burst |
Min. bend,in |
| -3 |
1/8 |
1,500 |
12,000 |
2.00 |
| -4 |
3/16 |
1,500 |
12,000 |
2.00 |
| -5 |
1/4 |
1,500 |
10,000 |
2.00 |
| -6 |
5/16 |
1,500 |
9,000 |
4.00 |
| -8 |
13/32 |
1,500 |
8,000 |
4.62 |
| -10 |
1/2 |
1,500 |
7,000 |
5.50 |
| -12 |
5/8 |
1,000, 950 hyd |
5,000 |
5.50 |
Minimum burst pressure is specified for 70 degrees
F.
Caution: Do not bend Teflon hose past its minimum
bend radius. Teflon hose will kink resulting in permanent damage to
the hose.
| 124 hose size |
Firesleeve size (2650-) |
| -3 |
-6 |
| -4 |
-7 |
| -5 |
-8 |
| -6 |
-9 |
| -8 |
-11 |
| -10 |
-12 |
| -12 |
-16 |
| -16 |
-18 |
Home
Copyright 1995 by Sacramento Sky Ranch Inc. All rights
reserved.
|
