|
Fire ProtectionAircraft hose assemblies located partially or totally in "Fire Zones" must have fire protection. "Fire Zone" is the area of the engine compartment forward of the firewall.The FAA recognizes two types of fire protection in regards to aircraft hose assemblies, fire resistant, and fire proof. In all cases fire protection is provided using two methods: 1. Silicone covered fiberglass (Firesleeve , p/n 2650-size)
2. Integral extruded (molded) silicone Firesleeve) Fire resistant requires a 5 minute flame exposure with fluid flow. Fire proof requires a 15 minute flame test with fluid flow.
Firesleeve installation tips Firesleeve should be cut slightly longer than desired as the Firesleeve shortens slightly when you push the hose through and the Firesleeve expands. Also, if the hose has a bend it will be necessary to cut the Firesleeve slightly longer to make up for the extra length required on the bend. Coat Firesleeve ends with red RTV to prevent liquid wicking up
sleeve.
|
Copyright 2003 by
Sacramento Sky Ranch Inc. All rights reserved. Prices subject to
change without notice. Not responsible for typographical or misprint. |