How to order an Ignition Harness
Your engine takes one ignition harness. Strange as it
may seem a harness for one magneto is called a 1/2 harness.
Here's what we need to know before to get the
correct harness for your engine
| We need to know what spark plug size you
have in your engine. Engines can use either 5/8 or 3/4 spark
plug. This is the nut size for the spark plug lead
3/4= RHM series spark plugs
(example RHM40E takes 7/8 lead wrench - also
called "all
weather")
5/8 = REM series spark plugs
(example REM40E takes 3/4 lead wrench)
|
3/4 on top and 5/8 ignition lead on bottom.
Notice that 3/4 is larger. |
| Engine model you have such as O-320 A2B
or O-470-R
|
|
| We need to know which magneto model
you have. Example Slick 4330, or Bendix S20 series.
Different magnetos have different caps. Be sure to tell us the
model and not just the manufacturer of the magneto.
|
 Slick
cap on left and Bendix on right |
| Harness Color can be either Light Blue
(Bendix Blue), Dark Plug, Yellow, Red, Black
|
 |
| Lead Elbow. Most harnesses do not use
elbows as the lead comes straight out of the nut as shown on the
right. You may request a 45 or 90 degree elbow if needed (extra
cost). |
 |
Now with the information contact us for a quote:
1-800-433-3564 or 916 421-A672
Fax (916) 421-5719
Email john@sacskyranch.com
Or fill out the form below and we will email you a quote -
Learn more about your new harness
Harness Quotation Form
|
